PROFILES
The profiles in the Profils Systèmes range are obtained by press extrusion, alloy no. 6060 BUILDING QUALITY, with impurity rate tolerances stricter than the standard.
PROTECTION
By chemical anodizing with the “QUALANOD” label, in natural and bronze finishes. Profiles in stock are available in anodized class 20 finish (20 to 24 microns).
By polyester powder coating with the “QUALICOAT” Seaside label, and the “QUALILAQUAGE” and “QUALIMARINE” labels. The minimum coating thickness is 60 microns for continuously visible surfaces.
FRAME
Tubular with a thickness of 55 mm, with the option of clipping on drips and cover strips.
Thermal break by insulating strip.
SASHES
Tubular, straight design on the exterior and interior, with straight glazing bead. Thickness is 59 mm.
Thermal break by insulating strip.
ASSEMBLY
- Frames and sashes joined using cleats with pins.
- All assembly parts must be aluminum and/or stainless steel.
- Cuts will be sealed with a “Small-Joint” type product or equivalent.
GLAZING
Single or insulating, 8 to 42 mm, held by 2 EPDM gaskets and a clipped glazing bead with a minimum height of 21 mm (rebate depth).
Glazing beads must always be placed on the interior side of the construction.
DRAINAGE
Drainage of possible infiltrated water is ensured by oblong holes in the bottom rail and the installation of nozzles with non-return flaps.
It is carried out by drilling or punching.
The drainage of the door sash and threshold is also done by oblong holes and nozzles with non-return flaps.
FRENCH CASEMENT
- Sealing: By compression of 2 EPDM gaskets when closing, and pressure balancing on the frame.
- Hinges: Reversible rebate hinges, fitted after frame assembly. Height adjustment with shims. In aluminum and/or stainless steel.
- Locking: Lacquered aluminum handle with 1/4 turn cremone for one- or two-leaf casements. 2-point cremone with top and bottom striker plates. Additional locking points possible.
TILT & TURN CASEMENT
- Sealing: By compression of 2 EPDM gaskets.
- Hinges and locking: Single-command fitting with rotating handle, rods, locking stays, and anti-misoperation system.
TOP-HUNG CASEMENT
- Sealing: By compression of 2 EPDM gaskets.
- Hinges: 2 to 4 hinges depending on sash width and weight. Same as French casement hinges.
- Locking:
- 1 latch up to 800 mm width
- 2 latches beyond 800 mm
HINGED DOORS
- Sealing: By compression of 2 rotating EPDM rebate gaskets.
- Hinges: 2 to 4 adjustable surface-mounted hinges depending on width and sash weight.
- Locking: 1-, 2-, or 3-point lock with latch operated by aluminum handle, and stainless steel swing security latch operated by European cylinder.
MAXIMUM DIMENSIONS
| Type | Width (mm) | Height (mm) |
|---|---|---|
| French window, 1 leaf | 1200 | 2300 |
| French window, 2 leaves | 2200 | 2300 |
| Type of Hardware | Width (mm) | Height (mm) | Surface Area (m²) |
|---|---|---|---|
| Single-leaf window | 900 | 1650 | 1.48 m² |
| Single-leaf French window | 1000 | 2050 | 2.05 m² |
| Double-leaf window | See maximum dimension charts in catalog | ||
| Double-leaf French window | |||
| Double-leaf French window + fixed panel | 2400 | 2050 | 4.92 m² |
| Tilt & turn single-leaf window | 1350 | 1650 | 2.22 m² |
| Tilt & turn single-leaf French window | 1000 | 2050 | 2.05 m² |
| Tilt & turn double-leaf window | 1800 | 1650 | 2.97 m² |
| Tilt & turn double-leaf French window | 1600 | 2050 | 3.28 m² |
| Top-hung window | 1800 | 850 | 1.53 m² |
| For larger dimensions | Please contact us | ||
