PRODUCT CONCEPT:
Window, French window, and entrance door with thermal break, frame thickness 55 mm, sash thickness 59 mm.
Dual-color option available on frames and sashes.
PROFILES:
The profiles making up the Profils Systèmes range are extruded by press, alloy no. 6060 BUILDING QUALITY, with impurity rate tolerances stricter than the standard.
PROTECTION:
By chemical anodizing with the “QUALANOD” label, in natural and bronze finishes.
Profiles in stock are available in anodized class 20 finish (20 to 24 microns).
By polyester powder coating with the “QUALICOAT” Seaside label, and the “QUALILAQUAGE” and “QUALIMARINE” labels.
The minimum paint thickness is 60 microns for continuously visible surfaces.
FRAME:
Tubular with a thickness of 55 mm, with the option of clipping on drips and cover strips.
Thermal break by insulating strip.
SASHES:
Tubular, exterior design shape, with straight glazing bead. Thickness is 59 mm.
Thermal break by insulating strip.
ASSEMBLY:
- Frames and sashes joined using cleats with pins.
- All assembly parts must be aluminum and/or stainless steel.
- Cuts will be sealed with a “Small-Joint” type product or equivalent.
GLAZING:
Single or insulating, 8 to 36 mm, held by 2 EPDM gaskets and a clipped glazing bead with a minimum height of 21 mm (rebate depth).
Glazing beads must always be on the interior side of the construction.
DRAINAGE:
Drainage of possible infiltrated water is ensured by oblong holes in the bottom rail and the installation of nozzles with non-return flaps.
It is carried out by drilling or punching.
The drainage of the door sash and threshold is also done by oblong holes and nozzles with non-return flaps.
FRENCH CASEMENT:
- Sealing: By compression of 2 EPDM gaskets when closing, and pressure balancing on the frame.
- Hinges: Reversible rebate hinges, with shim for height adjustment, in aluminum and/or stainless steel.
- Locking: Lacquered aluminum handle with 1/4 turn cremone, 2-point cremone, upper and lower striker plates. Additional locking points possible.
TILT & TURN CASEMENT:
- Sealing: By compression of 2 EPDM gaskets.
- Hinges and locking: Single-command fitting with rods, locking stays, and anti-misoperation system.
TOP-HUNG CASEMENT:
- Sealing: By compression of 2 EPDM gaskets.
- Hinges: 2 to 4 hinges depending on width and weight.
- Locking:
- 1 latch up to 800 mm width
- 2 latches beyond
HINGED DOORS:
- Sealing: By compression of 2 identical and rotating EPDM rebate gaskets.
- Hinges: 2 to 4 adjustable surface-mounted hinges depending on weight.
- Locking: 1, 2, or 3-point lock with latch operated by aluminum handle and stainless steel swing security latch operated by European cylinder.
MAXIMUM DIMENSIONS:
| Type of element | Width (mm) | Height (mm) |
|---|---|---|
| French window, 1 leaf | 1200 | 2300 |
| French window, 2 leaves | 2200 | 2300 |
